Sorry the Vehicle Research Area is undergoing maintenance.
Watch a video on how the Vehicle Database works
(this might take a few moments to download depending on your internet speed)
The Land-Rover Series 2 was unveiled to the world’s press on 16th April 1958. This Land-Rover differed from its predecessor noticeably as the Rover stylists had added a curved styling feature to the body side breaking up the previous slab-sided look." Modesty" side sill panels had also been added to hide the chassis, in all creating a more styled and finished look to the vehicle.
A number of mechanical improvements had taken place under the bodywork, mainly wider axles, (these gave a much improved turning circle), and the new 2286cc four cylinder petrol engine, (although the 88”short wheelbase had to wait until September to gain the new engine, keeping the previous model's 1997cc engine).
Although the Series2 gave the appearance of being radically new, the Rover Company had continued their policy of evolution not revolution, this policy was easy to spot when looking under the skin of the new models and finding many of the parts from their predecessors which now became known as Series Ones.
Look at the electrical system for instance, fuse box and junction box were Series One parts, the mounting plate for the fuse box and regulator had holes for the electric fuel pump fitted to the 1997cc engine. Indicators were an optional extra and the wiring was a separate loom until the event of the last of the 2 ’s leading to the introduction of the Series 2A ’s in 1961. The original Series 2 front wings only had one hole for side lamps.
The Diesel engine remained as fitted to the Series One, the 2052cc four-cylinder Rover unit.
The Series 2 gave way to the Series 2A in September 1961 when the main change was to the diesel engine which was redesigned along the lines of the current petrol engine and moved up to the petrol engine's capacity of 2286cc. The petrol engine also gained minor changes such as to the water pump and the rest of the cooling system.
The are many more differences between Series 2 ’s and the other Land Rovers, the moral of the story being if you find a Series 2 in original condition restore it sympathetically as unmodified Series 2s are becoming extremely rare.
The Series 2A was available in 88” (Regular) or 109” (Long) wheelbase form.
During the model's life small changes occurred starting with the instrument panel changing from body colour to black, the loss of chrome headlamp bezels, and the flat apron being replaced by the curved variety. The most visible change occurred in spring 1968 when export models emerged with their headlamps repositioned to the wings. Home customers had to wait until May 1969 when models for the home market where sold with new look to comply with (forthcoming) new lighting regulations. The Series 2A continued until 1971 when it was replaced by the Series 3.
Production of the Series 2 Station Wagons commenced with only the 88” on the release date in April1958. Customers for the long wheel base version had to make do with the Series One which remained on sale until the release of the Series 2 109” Station Wagon in September 1958.
The Station Wagons were to become the classic Land Rover as seen in many films and television programmes; their ancestry can still be seen in today’s TD5 Defender Estates.
Initially the Series 2 and 2A models were fitted either Rover’s four cylinder petrol or diesel engines, but in May 1967, the 6 cylinder engine was introduced. Production continued throughout the 1960’s with various small modifications until the final Series 2A 109” Station wagons manufactured from February 1971 until the in the introduction of the Series 3 in September 1971. These last Series 2A Station Wagons (chassis suffix H) were fitted with all synchromesh gearboxes as later fitted to all Series 3 ’s, and Salisbury rear axles as fitted to Series 3 109” models.
How can you tell the difference between Series 2s and early 2A's?
The easiest way is the chassis number as the Series 2 had a nine digit number that included the year of manufacture as the forth digit. Series 2 chassis numbers started with a 1. Series 2A chassis numbers start with a 2, and comprise of 8 digits.
141 0 02546 is a Series 2, 88” petrol, 1960 build, car number 2546.
241 02546a is a Series2A, 88” petrol, 2546th built since start of IIa production.
The Forward Control model was Land Rover’s answer to calls from customers wanting more payload . The prototype of this vehicle first ran in 1960 and was available as a Series 2A from September 1960. The Series 2A Forward Control had a 109” wheelbase, using 75% of the standard 109” chassis components. This vehicle was only available with the Rover’s four-cylinder petrol engine of 2286cc. The vehicle was under powered and unstable due to the combination of vehicle height and standard width axles.
To improve themodel the Rover engineers completely re-designed the vehicle, including options of Rover’s six-cylinder petrol engine of 2625cc, the length of which necessitated moving the front axle forward 1” increasing the wheelbase to 110”. This vehicle became the Series 2B was introduced in September 1966, other modifications including wider and stronger axles and stronger transmission.
How do you tell the difference between a Forward Control 2A and 2B?
The easiest way is Series 2As have high mounted headlamps, Series 2B have low mounted headlamps. In the picture above the 2B 110 is on the left.
If you wish to find out more just ask. For advice contact the S2C Vehicle Registrations Officer or why not post a question at our active Web Forum?
David Dutton - Series 2 Club VRO (Vehicle Registrations Officer)
updated 4th September 2015