S2C Forum Archives

Advanced search  

News:

  Our new forum is open for business:-  New Forum
To use the new forum you will need to re-register.

Please don't post anything on this forum.

Pages: 1 [2]   Go Down

Author Topic: swivel snivel  (Read 3213 times)

bedouin

  • S2C Member
  • Chassis welder
  • *
  • Offline Offline
  • Location: Durham
  • Posts: 49
  • Member no : 5857
  • .:
Re: swivel snivel
« Reply #15 on: August 13, 2020, 08:31:31 PM »

Hi Bedouin, if you are going for one one of the Britpart swivel kits, check out Island 4x4, they have them in stock at approx £83 (ex VAT) vs Paddocks at approx £101 (ex VAT) for the same kit.

I use Island 4*4 a lot and have always found them to be fast and reliable.

One thing though, the swivel seal that comes with the kit is listed at approx £2 - 3, by Britpart, it may be worth upgrading this (separately) to a Corteco version, these are some £12 - 15 ea, and hopefully (!) some of the additional cost is reflected in the seal quality.

As mentioned above, gators should help preserve the swivel surface and as an alternative to leather, there is a rubber gator kit (again Britpart) available.

HTH & Good luck.
 :cheers
Thanks HomeLandie
Logged

Safari John

  • Hub seal tester
  • ***
  • Offline Offline
  • Location: Warrington, Cheshire
  • Posts: 95
Re: swivel snivel
« Reply #16 on: August 14, 2020, 09:05:21 AM »


I use Island 4*4 a lot and have always found them to be fast and reliable.

One thing though, the swivel seal that comes with the kit is listed at approx £2 - 3, by Britpart, it may be worth upgrading this (separately) to a Corteco version, these are some £12 - 15 ea, and hopefully (!) some of the additional cost is reflected in the seal quality.

I have used Island 4x4 as well and found them to be very efficient and very friendly.

Corteco is OEM so it makes sense to spend the extra £10 a side for peace of mind, especially considering the environment they live in.

I don't know if Britpart still offer this, but I used to buy my suspension bushes with G after the part number eg NRC4514G
G is for Genuine. In the case of bushes, Metallastic is the OEM. Well worth spending the extra on.



Logged
1967 109SW 2.3 Diesel (ex 2.6 Petrol) on rebuild

Herald1360

  • S2C Member
  • Master of the oils
  • *
  • Offline Offline
  • Location: Leominster, Herefordshire
  • Posts: 719
  • Member no : 5979
  • .:
Re: swivel snivel
« Reply #17 on: August 14, 2020, 11:53:53 AM »

Hey John,

is this the same guy that remustered to engineer?  ;)

He had a wife..... :whistle

Could be. But the engineer's balls were brass not bronze......
Logged

Wittsend

  • Administrator
  • Lord of the Bearings
  • ****
  • Offline Offline
  • Location: Norwich
  • Posts: I am a geek!!
  • .:
Re: swivel snivel
« Reply #18 on: August 14, 2020, 01:47:34 PM »

 :-\

OK class let's keep it on topic and cut the innuendo ...


Logged
Who's a then ?
 

bedouin

  • S2C Member
  • Chassis welder
  • *
  • Offline Offline
  • Location: Durham
  • Posts: 49
  • Member no : 5857
  • .:
Re: swivel snivel
« Reply #19 on: August 15, 2020, 02:35:23 AM »

I have used Island 4x4 as well and found them to be very efficient and very friendly.

Corteco is OEM so it makes sense to spend the extra £10 a side for peace of mind, especially considering the environment they live in.

I don't know if Britpart still offer this, but I used to buy my suspension bushes with G after the part number eg NRC4514G
G is for Genuine. In the case of bushes, Metallastic is the OEM. Well worth spending the extra on.
swivels orderd
Logged

Betsy1969

  • S2C Member
  • Master of the oils
  • *
  • Offline Offline
  • Location: South Yorkshire
  • Posts: 827
  • Member no : 5469
  • .:
Re: swivel snivel
« Reply #20 on: August 15, 2020, 07:03:06 AM »

:-\

OK class let's keep it on topic and cut the innuendo ...

It was lost on me anyway Alan I haven’t a clue what they’ve on about.
Logged

Safari John

  • Hub seal tester
  • ***
  • Offline Offline
  • Location: Warrington, Cheshire
  • Posts: 95
Re: swivel snivel
« Reply #21 on: August 15, 2020, 12:33:07 PM »

It was lost on me anyway Alan I haven’t a clue what they’ve on about.

Maybe its for the best......  :whistle

Sorry teach!!!! (as I pass the piece of paper back to Herald1360 with a big smiley on it)
Logged
Pages: 1 [2]   Go Up
 

Page created in 0.051 seconds with 22 queries.