S2C Forum Archives
Main Section => Welcome to our virtual Pub Meeting ... => Topic started by: Sheppy on September 04, 2019, 07:38:57 PM
-
A mate is thinking of converting a series3 109 chassis to a 2b forward Control, is this do-able, what problems do you envisage?
Does anyone have the chassis diamentions for a 2b forward Control chassis?
Cheers
Shep
-
I think it is possible especially if the original chassis is still there to rob bits from and take dimensions.
Land Rover did start with a standard chassis then add the frame on top as far as I know. The spring hangers may be longer and a few extra brackets here and there but could be done I guess.
I have a book at home for the 2A / 2B forward control models. I think it's a parts manual rather than workshop but I'll have a look if there are any chassis drawings in it.
Craig.
-
Thanks Craig that would be great.
Shep
-
Something niggles at the back of my mind. 2B chassis are different from 2A forward control chassis. I think the 2B is 110 inch as opposed to 2a being 109.
Peter
-
Thanks Pete, I’ll pass the info on